page 2 of 3
5.
Pair the Scanner with the Apple device:
-
Power on the Scanner
-
Make sure the scanner is set to HID Keyboard mode (default). If needed you
can switch to iOS Mode (explained on page 3).
-
Enable Bluetooth on the Apple device. Search for Bluetooth devices
-
In the list of found devices, select Socket CHS [xxxxxx]. If prompted, tap Pair.
6.
Unpairing the scanner from your iPad or iPhone
Power on the scanner. Press and hold the TRIGGER
and the POWER button together. After you hear 3
beeps, release both buttons. The scanner will unpair
and power off.
7.
BEEP and Vibration Settings
For full instructions visit:
http://www.socketmobile.com/pdf/data-collection/CHS7Qi-QSG-Apple.pdf
Please call our support team if you need assistance setting up
your rental devices - 1(800) 622-6484
