converted to give the effect of a much bigger sound stage as though you are listening to large
loudspeakers or live music. The modes are indicated by the crossfeed light under the lens as
follows:- No light – Normal Mode with no crossfeed, Red light – Minimum Crossfeed (9dB 700Hz),
Green light – Medium Crossfeed (6dB 700Hz), Blue light – Maximum Crossfeed (4.5dB 700Hz)
Volume Bypass
Press and hold the Crossfeed switch whilst turning on to activate volume bypass mode. The volume
control will illuminate light blue to indicate line level output. Using bypass mode Hugo can be used
as a standalone DAC into a preamplifier with volume control.
Warning! – Volume bypass mode will set the volume on all outputs including the headphone
outputs to full level. Do not plug in or use headphones when activating bypass mode.
Specifications
Inputs:
1x Optical TOSLink 24-bit/192kHz-capable
1 x RCA coaxial input 24-bit/384kHz-capable
1 x Driverless USB input 16-bit/44/48kHz-capable
(designed for tablets/phones with no high resolution software)
1x HD USB input 32-bit/384KHz and DSD128-capable
(phone/computer/tablet playback; driverless on Apple / Android)
(Requires driver installation on Microsoft Windows machines)
1 x A2DP/APTX Bluetooth 16-bit/44/48kHz-capable. Upto10m range.
Outputs:
2x3.5mm headphone jacks
1x6.35mm (1/4 inch) headphone jack
1x (pair) stereo RCA phono output
Power Supply / Charger:
12V 0.6A 2.1mm connector. Centre Pin Positive.
100V – 240V 50/60Hz 1A wall adapter supplied
Dimensions:
100mm x 20mm x 132mm (Width x Height x Depth)
Weight:
0.4Kg ( 0.9Kg packed weight )
Made in England by Chord Electronics Ltd
www.chordelectronics.co.uk
The Bluetooth name and logos are registered trademarks and are owned by the Bluetooth SIG Inc.
Apt-X advanced Audio Codec Installed
