HugoTT
Instruction Manual
Desktop Headphone amplifier with Advanced DAC
Chord Electronics Limited
Chord Electronics Limited
Input
switch
XFeed
switch
Power
switch
3.5mm
jack
6.35mm
jack x 2
Thank you for purchasing the Chord HugoTT. In order to get the most from your
product, please take a few moments to read the instructions.
The HugoTT is an advanced desktop headphone amplifier and state of the art FPGA
DAC with our latest WTA filter algorithm. HugoTT supports PCM formats up to 384kHz.
It will also play DSD64 and DSD128 in DoP format.
Complete power isolation is assured by the use of rechargeable batteries with
the addition of super capacitors to smooth out the instantaneous power demands.
HugoTT was made for desktop use and will work wirelessly via bluetooth or can be
connected via USB to give a direct digital audio signal as found on many devices and
computers. You can also connect with BNC coax digital input, Optical TOSLink input
and full sized B type USB inputs for both SD (up to 16 bit 48KHz) & HD (32 bit 384KHz
& DSD).
HugoTT can be switched to line level output to connect into a preamplifier or used with
its advanced volume control as a digital preamplifier directly into an amplifier. To
complete the usability, HugoTT comes with remote control and display so the setup can
clearly be seen across a room. HugoTT is a truly versatile piece of equipment to help
enhance your listening experience.
Get to know HugoTT
HugoTT features several different inputs and output connections. Please choose the
one that suits your source components.
