17
maintenance of the PRIMA
adjusting the settings
Always remember to make any changes to settings with the volume set low or an instant
burst of sound could damage your loudspeakers
cleaning
To clean finger marks and other blemishes from your amplifier spray clear glass cleaner
onto a soft lint free cloth and then use the cloth to gently clean your amplifier.
When cleaning the Nickel / Brilliant finish please use a cream glass cleaner only
Directions
: Shake the bottle of cream glass cleaner thoroughly. Apply sparingly onto a dry, soft
and lint free cloth. Clean the area with the cloth. Polish off again with a new soft dry and lint free
cloth before the cream dries.
changing the batteries in the PRE AMP REMOTE
Simply undo the four small cross head screws on the side of your remote control. You may
need to run a sharp knife along the join to remove the battery casing, then replace with four
new AAA batteries as shown inside the battery compartment.
servicing
There are no user serviceable parts in your Chord amplifier, and it should only be serviced
by Chord Electronics Limited or their expressly approved Service Agents.
