26
frequently asked questions
My amplifier is switched on but there is no sound
Have you pressed the correct speaker switch?
The amplifier is on and the switches are on but there is no sound coming out
Have you pressed the correct output from your pre-amplifier.
The sound is vague and ill defined
Check that both loudspeakers are connected in phase (+ve to +ve and -ve to -ve) on
both sides.
There is a buzzing sound coming from the loudspeakers
The system may not be properly earthed or the interconnect cables may be running
near to mains cables.
I have bi-amped my loudspeakers but my amplifiers keep shutting down as soon as I
turn them on
Have you removed the bi-wire links in the back of the loudspeakers?
I have connected my 3 channel amplifier to my processor and the main left and right
out of my AV processor in to my hi-fi, but there is very little sound coming out of the
left and right speakers
Have you set the volume on your stereo pre-amplifier to the correct gain to match the
other channels in the system?
Summary of Contents for SPM 12000
Page 1: ...CHORD Power amplifiers...
