background image

36" Belt DriveChore-Time Extended Warranty

MV1680K

3

Chore-Time Group, a division of CTB, Inc. (“Chore-Time”) warrants the new CHORE-TIME Turbo

®

 Fans manufactured

by Chore-Time to be free from defects in material or workmanship under normal usage and conditions, for One (1) year

from the date of installation by the original purchaser (“Warranty”).  Chore-Time provides for an extension of the

aforementioned Warranty period (“Extended Warranty Period”) with respect to certain Product parts (“Component Part”) as

set forth in the table below.  If such a defect is determined by Chore-Time to exist within the applicable period, Chore-Time

will, at its option, (a) repair the Product or Component Part free of charge, F.O.B. the factory of manufacture or (b) replace

the Product or Component Part free of charge, F.O.B. the factory of manufacture.  This Warranty is not transferable, and

applies only to the original purchaser of the Product.

CONDITIONS AND LIMITATIONS

THIS WARRANTY CONSTITUTES CHORE-TIME’S ENTIRE AND SOLE WARRANTY AND CHORE-TIME

EXPRESSLY DISCLAIMS ANY AND ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

EXPRESS AND IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES AS TO
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSES.  CHORE-TIME shall not be liable for any direct,

indirect, incidental, consequential or special damages which any purchaser may suffer or claim to suffer as a result of any

defect in the Product.  Consequential or Special Damages as used herein include, but are not limited to, lost or damaged
products or goods, costs of transportation, lost sales, lost orders, lost income, increased overhead, labor and incidental costs,

and operational inefficiencies.  

Some jurisdictions prohibit limitations on implied warranties and/or the exclusion or

limitation of such damages, so these limitations and exclusions may not apply to you. This warranty gives the original
purchaser specific legal rights. You may also have other rights based upon your specific jurisdiction.

Compliance with federal, state and local rules which apply to the location, installation and use of the Product are the
responsibility of the original purchaser, and CHORE-TIME shall not be liable for any damages which may result from non-
compliance with such rules. 

The following circumstances shall render this Warranty void:

•Modifications made to the Product not specifically delineated in the Product manual.

•Product not installed and/or operated in accordance with the instructions published by the CHORE-TIME.
•All components of the Product are not original equipment supplied by CHORE-TIME.

•Product was not purchased from and/or installed by a CHORE-TIME authorized distributor or certified represen-

tative.

•Product experienced malfunction or failure resulting from misuse, abuse, mismanagement, negligence, alteration, 

accident, or lack of proper maintenance, or from lightning strikes, electrical power surges or interruption of electricity. 

•Product experienced corrosion, material deterioration and/or equipment malfunction caused by or consistent with 

the application of chemicals, minerals, sediments or other foreign elements.

•Product was used for any purpose other than for the care of poultry and livestock.

The Warranty and Extended Warranty may only be modified in writing by an officer of CHORE-TIME.  CHORE-TIME 
shall have no obligation or responsibility for any representations or warranties made by or on behalf of any distributor, 
dealer, agent or certified representative. 

                                                                                                                                 Effective: 

April, 2014

Chore-Time Extended Warranty

Component Part

Extended Warranty Period

RXL Fan (except motors and bearings)

Three (3) Years

TURBO® Fan (except motors and bearings) 

Three (3) Years

TURBO® Fan fiberglass housing, polyethylene cone, and cast aluminum blade.

Lifetime of Product

TURBO® fan motor and bearings.

Two (2) Years

Chore-Time® Poultry Feeder Pan 

Three (3) Years

Chore-Time® Rotating Centerless Augers (except where used in applications involving high 

moisture feed stuffs exceeding 17%) 

Ten (10) Years

Chore-Time Steel Auger Tubes 

Ten (10) Years

ULTRAFLO® Breeder Feeding System auger and feed trough.

Five (5) Years

ULTRAPAN® Feeding System augers .

Five (5) Years

Summary of Contents for Mv1680-001



















Reviews: