Christie F100, Installation Manual

2-2

Pedestal and Frame Installation Manual

020-100734-02 Rev. 1 (11-2011)

Section 2: Installation and Setup

2.1.2 For F100 Frames (Hardware Kit P/N: 000-102673-xx)

• (2) Bracket extension hooks
• (4) Flat washers 

ɸ

4.3

• (4) M4 hex nuts
• (4) Flat washers 

ɸ

6.4

• (10) Flat washers 

ɸ

8.4

• (10) M8 socket head cap screws
• (4) M6 socket head cap screws
• (2)  Grommets

2.1.3 For LCD Video Wall Mounts and LCD Panels

Refer to the

 ML10/MP10 40-65” LCD Video Wall Mount Instruction Sheet (P/N: 020-100726-xx) 

and the

LCD Panel FHD551-X User Manual (P/N: 020-100713-xx)

. 

2.2

Kits Required

• P100 LCD Pedestal (P/N: 135-106108-xx)
• F100 LCD Frame (P/N: 135-105107-xx)
• FHD551-X LCD Panel (P/N: 135-001102-xx)
•

Optional:

 LCD Frame Trim 8ft (P/N 135-108100-xx)

2.3

Tools and Hardware Required

• Level
• Phillips screwdriver
• 5mm allen key for attaching P100 Pedestals
• 6mm ball driver metric screwdriver for attaching F100 Frames
• 24mm open ended/adjustable wrench for tightening locknut on pedestal feet
• 7mm open ended wrench for fastening extension hook
• 2x 10mm open ended wrench for fastening pedestal to pedestal
• 13mm open ended wrench for fastening frame to pedestal

2.4

Service and Support

Trained service technicians are available to diagnose and correct system-related problems. If you encounter 
any problems during the setup and installation of your system, contact the authorized dealer or Christie Partner 
from whom the system was purchased.