1. Remove the top cover (on page 45).
2. Remove the front cover (on page 48).
3. Remove the c-clip, locking the foot bolt in place.
4. Turn the front foot counter-clockwise to remove.
5. To re-install, follow these steps in reverse order.
Removing the rear foot
Complete the following procedure to remove the rear foot.
Estimated replacement time: 20 minutes.
1. Remove the top cover (on page 45).
2. Remove the two screws from the rear cover.
3. Remove the card cage lid (on page 59).
4. Remove the two screws securing the card cage to the ballast.
5. Remove the two screws securing the card cage to the bottom cover.
6. Remove the clip screw.
7. Place projector on its side.
8. Remove the five screws from the bottom rear of the projector.
9. Lift the card cage slightly to remove the rear cover.
10. Remove the c-clip, locking the foot bolt in place.
11. Turn the rear foot counter-clockwise to remove.
12. To re-install, follow these steps in reverse order.
Projector covers and feet
M Series Service Guide
49
020-100551-11 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for M Series
Page 1: ...Service Guide 020 100551 11 M Series ...
Page 95: ......
