List of components
Ensure the following components were received with the projector:
•
Infrared remote (includes two, 1.5V AA batteries and a communication cable for wired
applications)
•
Line cord
•
Two M6 x 10 mm lens mount security screws
•
One 5 mm lens mount security Allen key
•
Warranty card
•
Web registration form
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Environmental specifications
Learn the environmental specifications for the projector.
Operating temperature range
5 to 40ºC (41 to 104ºF)
Storage temperature range
-40 to 70ºC (-40 to 158ºF)
Humidity range
10% to 80%, non condensing
Operating altitude
10,000 ft. maximum
IR remote keypad
The IR remote keypad controls the projector by way of wireless communications from a battery-
powered infrared (IR) transmitter.
To use the IR remote, direct the keypad toward the projector’s front or rear IR sensor and press a
function key. One of the two IR sensors on the projector detect the signal and relay the commands for
internal processing. The remote also offers a connector for wired connections to the projector.
Introduction
M Series Service Guide
8
020-100551-11 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for M Series
Page 1: ...Service Guide 020 100551 11 M Series ...
Page 95: ......
