Installation & Setup
2-4
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
WARNINGS
The handles can not support more than
ONE
projector.
Do
not
use handles for extended time periods.
Do
not
use the handles as safety points, or as points from which
to suspend or hoist the projector.
Hoisting
Four integral rigging points on the top of the projector (Figure 2.5) and eight on the
bottom (Figure 2.6) enable either upright or inverted hoisting. For either orientation,
hoist an individual projector, or up to three projectors in a stack.
Figure 2.5. Top Rigging Points
RULES FOR ALL HOISTING:
•
Use at least
four
rigging points for hoisting
up to
three
projectors.
•
Connect safety cables, and rigging
equipment to the designated locations on
the projector.
•
Use hoisting and rigging equipment
suitable to your application such as clamps,
cables, eyebolts, or straps, and which
accommodate the load rating. All integral,
metric hardware on the projector accepts
an M12 thread only.
•
Never hoist a projector by its feet, handles,
or any other component (Figure 2.7).
Figure 2.6. Bottom Rigging
Points
