S
+
12K / 14K / 16K / 20K Lamp & Filter Instructions
013-100049-03 (Rev.1)
7 of 8 Pages
STEP 3 - REPLACE FILTER
Remove the old filter and insert a new one. Follow the airflow
arrows for correct orientation. Refer to Figure 8. The Roadster
S+20K model has a rhomboid-shaped filter; therefore, insert the
sharply angled corner first — place fully back on the left. Ensure
the triangular metal filter brace is installed after the filter has
been positioned. Refer to Figure 9.
Available Filter Replacement Kits:
•
03-900546-01P: Five pack filter kit for 2.0kW and 2.4kW projectors
•
003-000-310: Five pack filter kit for 3.0kW projectors
STEP 4 - RE-INSTALL THE FILTER GRILLE/DOOR
Tighten the single top screw to secure the filter grille/door.
Figure 8. Filter Airflow
Figure 9. Installing the Angled Air Filter (ROADSTER S
+
20K ONLY).
OFFICIALLY RELEASED
Document Control
August 29, 2006
