Assembling the Christie
One rigging frame
With the Christie One rigging frame, the projector can be secured to trusses or structures built for the
purpose of positioning the projector.
With the frame:
•
Up to three projectors can be stacked in landscape orientation.
•
A single projector can be positioned in portrait mode but no stacking is permitted.
Christie ships the frame separately from the projector.
Affected products
The Christie One rigging frame is designed for use with the following projectors.
•
HS Series projectors (D13HD-HS, D13WU-HS, D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-
HS, D20HD-HS, D20WU-HS, DWU1612-HS, DWU2022-HS)
•
H Series (D12HD-H and D12WU-H)
•
Q Series (DWU951-Q, DHD951-Q, DWX951-Q, DXG1051-Q, DWU851-Q, DHD851-Q, DWX851-
Q)
•
GS Series (DHD635-GS, DWU635-GS, DHD635-GS China, DWU635-GS China, DHD630-GS,
DWU630-GS, DHD630-GS China Black, DWU630-GS China, DHD630-GS Black, DWU630 GS
Black, DHD1075-GS, DWU1075-GS, DHD1075-GS China, DWU1075-GS China, DWU6322-GS,
DWU7062-GS, DWU1082-GS, DHD850-GS, DWU850-GS, DHD700-GS, DWU700-GS)
Required components
The following components are required.
Christie One rigging frame (P/N: 140-113106-03 or higher)
Safety warnings and guidelines
Read all safety and warning guidelines before starting this procedure.
Danger! If not avoided, the following results in death or serious injury.
•
Do not stack the device unless specified in this manual.
•
The supporting structure must safely support the combined load of the product, all attached
hardware, and components following all local safety standards and regulations.
•
Use all mounting points, including the safety point, when installing the product overhead.
Assembling the Christie One Frame Instruction Sheet
1
020-101901-04 Rev. 1 (03-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
