25
English
Error Message:
E1 (ERRoR 1):
Normal state: During workout, when the monitor did not get the count signal
from the gear motor more than 4 seconds and check under successive 3
times then the LCD will show E1.
Power on state: The gear motor will return to zero automatically, when the
signal of motor cannot be detected for more than 4 seconds then the gear
motor’s driver will be cut off immediately and show the E1 on the LCD
display. All the other digital and function mark are blank, and the output
signals are cut off also.
LCD Workout Graphics
PRESET PRoGRAM PRoFILES:
E2 (ERRoR 2):
When the monitor read the memory data, if the I.D. code
is not correct or the memory IC damages then the monitor will show E2
immediately at power on.
E3 (ERRoR 3):
After 4 seconds by start mode, the computer detects the
faulty motor did not leave the zero point then the LCD bar displays “E3”.
Technical data of the current adapter
1. Available for Input: 230V/50Hz Output: 6V=DC/1A
PROGRAM 1 Program 2 PROGRAM 3
MANUAL STEPS HILL
PROGRAM 4 Program 5 PROGRAM 6
RoLLING VALLEY FAT BURN
PROGRAM 7 Program 8 PROGRAM 9
RAMP MoUNTAIN INTERVALS
PROGRAM 10 Program 11 PROGRAM 12
RANDoM PLATEAU FARTLEK
PROGRAM 1 Program 2 PROGRAM 3
MANUAL STEPS HILL
Summary of Contents for 1105
Page 3: ...3 Deutsch ...
Page 13: ...13 Deutsch BENUTZER PROGRAMME HERZFREQUENZ PROGRAMMPROFILE ...
Page 71: ...71 ...
