20
Step 3:
Attach the seat holder (23) at seat frame (9).
1. Place the seat holder (23) into the holder of seat frame (9), set it at the
desired position and screw it onto the seat frame (9) by fixed bracket
screw (18), washer (17) and star grip nut (16).
Attention:
Ensure before every exercising that the saddle is tighten
firmly
Step 4:
Attach the seat (24) and back cushion (25) at seat support (23).
1. Place the seat (24) with back side onto the seat support (23) so that the
holes are align.
2. Put on each screw M8x15 (20) one washer (21) and tighten the seat (24)
at seat support (23) firmly.
3. Place the back side of back cushion (25) against den seat holder (23)
so that the holes align.
4. Screw the back cushion (25) at seat holder (23) tightly by using screws
M6x44 (37) and washers (36).
5. Attach the cover (39) onto the screw connection and fix with screw (38).
Step 5:
Installation of the hand grips (15L+15R) at the seat frame (9).
1. Place the hand grips (15L+15R) near to the seat frame (9) and connect
the plugs of pulse connection cables 1 (10) and pulse cables (14).
2. Adjust the holes in the tubes so that they are aligned and push the bolts
(12) through the holes and tighten the hand grips (15L+15R) at seat
frame (9) with washers (16) and cap nuts (6) firmly.
Summary of Contents for 1213
Page 4: ...4 ...
