23
Step 5:
Attach the computer (76) at support (2).
1. Place the computer (76) to support (2) and put the plug of
connection cable (72) into the plug from computers (76)
backside.
2. Insert the plugs of pulse cables (59) into the jack of the computer
(76) and attach the computer (76) to top monitor bracket of
support (2) with screws (77). The screws (77) you find at backside
of computer. (
Attention: Ensure that the cable loom are not
crunched or pinched during installation.)
3. Attach the pedal tube cover sets (49L+49R) to the connection
tubes (5) and secure with screws (24+25).
4. Attach the hand grip cover sets left (52a+52b) and right
(79a+79b) to the connection tubes (5) and secure with screws
(25).
5. Attach the idle wheel cover (5) to the pedal tube support (7) and
secure with screws (24).
English
Step 6:
Attach the AC adapter (71).
1. Insert the small plug of adapter (71) to the DC connection cable
(106) at end of chain guard.
2. Insert the adapter (71) to the jack of wall power (230V~50Hz).
Step 7:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the ma-
chine at a low resistance setting and make your individual
adjustments.
Note: Please keep the tool set and the instructions in a safe place
as these may be required for repairs or spare parts orders becoming
necessary later.
Summary of Contents for 1621
Page 4: ...4 ...
