12
GB
1. The packing tape of the massage chair is disassembled
and removed.
2. Remove the foam on both sides of the massage chair.
3. The accessories of massage chair is removed and
placed aside.
1. Remove the plastic wrap of the massage chair and
open back of chair until you hear ”Ding”.
2. Remove the box at the bottom of the massage chair.
1. Connect the back area to the backrest using the zipper.
2. Please put Back Rest big head pillow, cushion in the
right place.
3. Connect the back area to the seat cushion using the
zipper.
4. The tube under the back of the cushion is connected
to the tube on the base.
5. Please put the small pillows on the massage chair. And
tube of small pillows through the big pillow. The tube
of small pillows connect to tube under the back of
cushion.
Unpacking
Snap the backrest into place
Install airsystem
Installation
Small head pillow
Big head pillow
Back
rest
SeatCushion
Please check after opening the packing that all the
parts shown in the following parts lists are there.
Once you are sure that this is the case, you can start
assembly. Please contact us if any components are
defective or missing, or if you need any spare parts or
replacements in future.
Internet service- and spare parts data base:
www.christopeit-service.de
This product is created only for private Home sports activity and not allowed to us in a commercial or
professional area.
Address:
Top-Sports Gilles GmbH
Friedrichstr. 55
42551 Velbert
Telefon: +49 (0) 20 51 - 6 06 70
Telefax: +49 (0) 20 51 - 6 06 74 4
e-mail: info@christopeit-sport.com
www.christopeit-sport.com
