Manual Operation
3-95
3.
Press
“
EXIT
” to return to the MAIN PAGE.
Figure 3-169
When in SANDIA _MODE, the screen shows as Figure 3-170.
Figure 3-170
Setting Procedure:
1.
Move the cursor to VMP and use the numeric keys (
0
~
9
) to set the
maximum power voltage.
2.
Move the cursor to PMP and use the numeric keys (
0
~
9
) to set the
maximum power.
3.
Move the cursor to FF and use the numeric keys (
0
~
9
) to set the fill factor.
4.
Move the cursor to BETA and use the numeric keys (
0
~
9
) to set the
voltage temperature coefficient.
5.
Move the cursor to IRR and use the numeric keys (
0
~
9
) to set the
irradiation.
6.
Move the cursor to IRR REF and use the numeric keys (
0
~
9
) to set the
irradiation reference.
7.
Move the cursor to TMP and use the numeric keys (
0
~
9
) to set the
temperature.
8.
Move the cursor to TMP and use the numeric keys (
0
~
9
) to set the
temperature reference.
9.
Press “
ON/OFF
” will prompt a confirmation window as Figure 3-171 shows.
