Overview
1-1
1.
Overview
1.1
Introduction
Chroma 62000H Series with Solar Array Simulation are high power density DC Power
Supplies that can provide stable DC output and accurate measurement for voltage and
current.
The features of 62000H Series with Solar Array Simulation DC Power Supply are:
(1) The output is able to simulate the I-V curve of solar panel module with Programming
Mode provided.
(2) Voltage mode with two loops control
able to provide stable and quick responded
output, also to set the slew rate of output voltage and current.
(3) High power density output
the maximum output power can up to 15kW under 3U
height.
(4) 16-bit ADC/16-bit DAC
provides excellent resolution.
(5) Lower transient spike and transient response time
makes the unit under test gets the
most stable output and the best protection under the circumstance of load variation
(6) Editing mode (Programming Mode) for output waveform
provides multiple output
voltage and current combinations in real time for long period test.
(7) Rotary knob and keyboard control on the front panel
to set the output voltage and
current.
(8) VFD panel
gives users a high brightness and wide view angle interface for operation.
(9) Via GPIB/Ethernet (option), USB, RS-232/RS-485 or APG (analog programmable
interface) interface
to do remote control.
1.2
System Functions
1.2.1
Operation Mode
(1) Local operation is performed by the keyboard and rotary knob on the front panel.
(2) Remote control is done via GPIB/Ethernet (option), USB or RS-232/RS-485 interface.
(3) Through the APG input to control output via analog signal.
(4) The settings and editions of I-V curve are done by Solar Array Simulation Soft Panel.
1.2.2
Protection
(1) Protections for voltage phase loss, input over-voltage or under-voltage, output over-
voltage, over-current, over-power, over-temperature, fan fail, CV/CC foldback and etc.
are available.
(2) Free temperature control for fan speed.
