Remote Operation
5-37
5.6.2.6
PROGRAM Subsystem
1.
PROGram: SELected
Description:
It sets the executed program no.
Syntax:
PROGram: SELected <NR1>
Parameter:
1 to 10
Example:
PROG:SEL 10
Query Syntax:
PROG:SEL?
It returns the program no. in use.
Return Parameter: <NR1>
Query Example: PROG:SEL?
Return Example: 10
2.
PROGram:LINK
Description:
It links a program to another when ends.
Syntax:
PROGram:LINK <NR1>
Parameter:
0 to10 (0 is not linked)
Example:
PROG:LINK 7
Query Syntax:
PROG:LINK?
Return Parameter: <NR1>
Query Example: PROG:LINK?
Return Example: 7
3.
PROGram:COUNT
Description:
It sets the program file to be executed in series.
Syntax:
PROGram:COUNT <NR1>
Parameter:
1 to 15000
Example:
PROG:COUNT 7
Query Syntax:
PROG: COUNT ?
Return Parameter: <NR1>
Query Example: PROG: COUNT ?
Return Example: 7
4.
PROGram:RUN
Description:
It executes the program.
Syntax:
PROGram:RUN ON
PROGram:RUN OFF
Parameter:
ON/1, OFF/0
Example:
PROG:RUN ON
Query Syntax:
PROGram:RUN?
Return Parameter: <NR1>
Query Example: PROGram:RUN?
Return Example: 1
5.
PROGram:SAVE
Description:
It saves the program.
Syntax:
PROGram:SAVE
Parameter:
None
Example:
PROG:SAVE
6.
PROGram:PULL
Description: It controls the internal resistance of PROGRAM TRIGGER input
signal.
Syntax:
PROGram:PULL <ARG>
