Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
2-8
(2) The output cable must be rated 85
C at least.
(3) Assembly
see Figure 2-9 (a) & (b) and Figure 2-11 (c), (d), (e), (f) and (g) for
62020H-150S. Execute the steps below:
a.
Scrape off the skin of power cable tip (the bare portion is about 1cm) and use an O
type terminal to crimp it.
b.
Secure the power cable and input terminal with a Phillips screwdriver.
c.
Secure the safety cover latch and safety cover to prevent the cable from falling or
the electric terminal from exposing.
(4) A standard hoop is attached when purchasing the A620028 or A620027 SLAVE model
to fix the current sharing cables as shown in Figure 2-10. Mount it first and then continue
the installation as shown in Figure 2-9.
(a) (b)
Figure 2-9
Figure 2-10
