Program Sequence
4-19
START
10(MIN)
50V
10V
Figure 4-21
START
10(MIN)
50V
20V
10V
Figure 4-22
4.2.2
Execution of V_STEP MODE
After the setting is done, press “
ON/OFF
” to confirm and start the execution. To abort it, just
press “
EXIT
”.
4.2.2.1
Running V_STEP MODE
1.
Press “
ON/OFF
” will appear a confirmation window as Figure 4-15 shows.
2.
Press “
ON/OFF
” one more time to confirm the execution. It will skip to the MAIN PAGE
during execution as Figure 4-23
shows. To quit the execution, press “
EXIT
” can return
to the MAIN PAGE window at standby.
Press “
EXIT
” to interrupt the Program execution forcibly that is the
Power Supply stops output.