ETHERNET Functions (62020H-150S Only)
7-5
7.1.4
SCPI
The SCPI sends the command strings to the device to activate the function. See the device
user’s manual for the associate commands.
(1) SCPI command: The command input area.
(2) Send (password required): It sends the command strings to the device to activate the
function.
(3) Result: The return message display area. If the command sent to the device has a
return value, it will display here.
7.1.5
Remarks
(1) If the system password is blank, there is no need to enter the password.
(2) Once the entered password is confirmed, the rest of the functions that are protected by
the password will not ask for password confirmation again unless the password is reset
or the web page is logged in again.
(1)
(3)
(2)
