Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
3-22
3.3.3.1
Connecting Series/Parallel Output Cable
Figure 3-32 and Figure 3-33 show the connections of serial and parallel output cables.
SVO+
VO+
VO
SVO
SVO+
VO+
VO -
SVO
DUT
SVO+
VO+
VO
SVO
SVO+
VO+
VO -
SVO
DUT
62150H- 600S
62150H-600S
--
--
--
+
-
Figure 3-32
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
DUT
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
SVO+
VO+
VO-
SVO-
DUT
62150H-600S
62150H-600S
62150H-600S
62150H-600S
62150H-600S
+
-
Figure 3-33
3.3.3.2
Assembling Series/Parallel Communication Interface
1.
When the DC Power Supply is connecting in series for operation, the SYSTEM BUS
connectors on the rear panel must be connected as shown in Figure 3-34(a.) For
Model 62020H-150S, connect the cables as shown in Figure 3-34(b)
CURRENT
SHARING
CURRENT
SHARING
1
#
2
#
[ SYSTEM BUS ]
[ SYSTEM BUS]
(a) (b)
Figure 3-34