Sandi
TM
QSG V2.0
QSG P/N: 1518-0702
Overview
The Chroma-Q
®
Sandi
™ is a cutting-edge white LED light fixture that provides homogenous soft
light. Whether you are attending an online meeting or casting yourself live, Sandi
™ is the light
source to be used that can match with any background you might have.
Fig.1: Sandi
™ 1622
Safety
Caution
1.
This product is for professional use only. It is NOT intended for outdoor use.
Power Supply and Cabling
The Chroma-Q
®
Sandi
™ is powered by USB-C PD. Sandi is supplied with 90W USB C power
supply unit and a 100W rated cable. A phone or a tablet can be charged from the light fixture
through a USB A Port.
Mounting
The Sandi
™ is a table top lighting fixture. It comes with a Phone Holder, Tablet / Monitor Holder.
The Phone Holder slides up/down along the slot of Monitor/ Tablet Holder. A VESA 100X100 or
75X75 monitor can be mounted on the monitor holder at five different heights. The maximum
size of the monitor is 22”.
Optics
The Sandi
™ is built with a diffuser that provides a homogenized beam spread.
Control
Brightness or light intensity
Color temperature referred in this manual as CCT
2800K is more of a warm yellow tone, 6000K is more of a cold blue tone
Turning On/Off:
The unit needs to be connected to a 90W (20V, 4.5A) power supply unit
through its USB-C port. Long Pressing (3 seconds) both knobs will turn off the unit. Pressing any
of the knobs will turn on the unit. The light fixture remembers the last state (Brightness and CCT)
when it was powered off.
Brightness and CCT of the whole Unit:
The Sandi
™ can be controlled through Front Control
Panel with OLED display. The Left-Knob is for controlling the brightness and the Right Knob is
for controlling the CCT. The knobs can be rotated or pressed.
By rotating the Left Knob clockwise / anti-clockwise, brightness can be increased / decreased by
1%. When the Brightness increase / decrease indicator shows UP (↑), the brightness will go up
by 10%, when the knob is pressed.
