English
–
V.202106
USB and Ethernet Stand Alone interface
11
Datasheet / Technical manual
Save in memory
STAND ALONE CONFIGURATION AND SETTINGS
Save scene in memory
In the Stand-Alone mode of the control software, drag and drop a scene from the open
project’s scene list to the list of scenes to be written to the interface’s
memory. Adding
a trigger action (LED Button, Contact, IR remote, DMX In, Repeat Time and Start Time)
will automatically transfer the selected scene into the list of scenes to be written into
the memory.
Click to Save in Memory button and select the desired option (Save in Memory by
default)
Configuration options
IN/OUT Config tab
Change the configuration of the interface
’s
DMX I/O when using 2 DMX universe devices. Trigger scenes via the DMX
signal from an external DMX controller. Map the soft
ware’s DMX universes to the interface outputs
in order to optimise the
memory storage capacity of the controller in Stand Alone mode. Manually choose the number of active channels for each
DMX universe.
Clock tab
Displays the time and date of the selected interface from the list. Modify the time and date (minutes, hours, days, months
and years). Synchronize the interface clock using the current computer time and date by selecting the option: Set Current
Date and Time.
Options tab
Turn off the LED display after 4 seconds of inactivity. Select a default scene to play automatically after powering up the
interface (with USB or external power supply). Note: the selected default start scene loses priority if another scene has the
option “restore if power off”.
When the Merge In/Out option is activated, the input from Line B (DMX-B) is analysed and combined with the interface
output A (DMX-A), such that both DMX streams are merged in real time.
Configure t
he “Select dimmer channels” option to
choose Dimmer or RGBW channels separately to be controlled directly by
a dimmer button or dry contacts.
Master / Slave tab
Select the Master/Slave mode when using multiple interfaces in order to synchronize their standalone mode. Refer to each
interface datasheet to understand the possible configurations.
Triggers tab
Select a contact for each action: , Dimmer -, Blackout, Speed +, Speed -, Pause, Scene +, Scene - and Area.
Zone Tab
Displays a summary of the Zone DMX configuration and the associated DMX addresses.
