English
–
V.202106
USB and Ethernet Stand Alone interface
18
Datasheet / Technical manual
DMX Output plays scenes in memory
and triggers from external DMX
source via the DMX IN signal
External DMX output source is
connected to the interface
input
DMX-B Must be set to Input in
the software
Standard DMX Controller board
DMX A
DMX B
DMX in
Stand Alone mode offers up to 512 DMX IN channel triggers and up to 255 DMX trigger values per channel.
This enables triggering scenes directly from an external DMX source.
In Stand Alone window, set In / Out Config as DMX 1 Out/DMX 2 In, and select the DMX Out universe
By selecting a scene in the list, it's possible to choose the channel number and the DMX value to trigger the scene. The
scene will play when the DMX channel value is reached or exceeded.
