Starfire Series Manual
w w w . c h r y s a l i s a c o u s t i c s . c o m
4
P h a s e A d j u s t m e n t - 0 ° / 1 8 0 °
This control allows you to “reverse” the phase of the subwoofer’s output signal 180° to correct for any possible mismatch and resulting
cancellation between the subwoofer and your main speakers/amplifier. To adjust, simply listen to the system with music playing, then depress
the phase switch from one position to the other and listen for a change in mid-bass frequency output. The correct position will have a greater
amount of apparent mid-bass frequency output.
For all installations, experiment with the phase switch to determine the setting (0 or 180 degrees) that produces the most mid-bass. If the
settings sound similar, we recommend the “0” position.
A u t o Tu r n o n F u n c t i o n
The subwoofer will turn itself on automatically when an audio signal is present. If no signal is present for approximately eight minutes, the
unit will switch to standby mode (Red LED). While in standby mode, your subwoofer will draw very minimal power.
Warning:
If the Sub-Out channel signal level from your receiver is too weak, this feature will not operate properly. See VOLUME CONTROL section
on previous page.
Summary of Contents for STARFIRE-10
Page 2: ...Starfire Series Manual i ...
