manualshive.com logo in svg

Chrysler 1998 Voyager, Service Manual

The Chrysler 1998 Voyager Service Manual is a comprehensive guide that provides users with detailed information and step-by-step instructions for maintaining and repairing their vehicle. Download this manual for free from our website, and gain access to valuable knowledge to keep your Voyager running smoothly.

Share
Download
background image

DESCRIPTION . . . . . . . . . . . SPECIFICATIONS

Nominal . . . . . . . . . . . . . . . . . 63.005–63.020 mm
–0.25 . . . . . . . . . . . . . . . . . . . . 62.755–62.770 mm
–0.125 . . . . . . . . . . . . . . . . . . . 62.880–62.895 mm

Center Bearing Diameter . . . . . . . . . . . . . . . . . . .

Nominal . . . . . . . . . . . . . . . . . 63.050–63.093 mm
–0.25 . . . . . . . . . . . . . . . . . . . . 62.800–62.843 mm
–0.125 . . . . . . . . . . . . . . . . . . . 62.925–62.968 mm
Clearance Between Journal and Bearing:

0.030–0.088 mm . . . . . . . . . . . . . . . . . . . . . . . . . .

Rear Journal Diameter . . . . . . . . . . . . . . . . . . . . .

Nominal . . . . . . . . . . . . . . . . . 79.980–80.000 mm
–0.25 . . . . . . . . . . . . . . . . . . . . 79.730–79.750 mm
–0.125 . . . . . . . . . . . . . . . . . . . 79.855–79.875 mm

Rear Bearing Diameter . . . . . . . . . . . . . . . . . . . . .

Nominal . . . . . . . . . . . . . . . . . 80.045–80.070 mm
–0.25 . . . . . . . . . . . . . . . . . . . . 79.795–79.820 mm
–0.125 . . . . . . . . . . . . . . . . . . . 79.920–79.945 mm
Clearance Between Journal and Bearing:

0.045–0.090 mm (Wear Limit: 0.200 mm) . . . . . . .

Connecting Rod Journal . . . . . . . . . . . . . . . . . . . .

Nominal . . . . . . . . . . . . . . . . . 53.940–53.955 mm
–0.25 . . . . . . . . . . . . . . . . . . . . 53.690–53.705 mm
–0.125 . . . . . . . . . . . . . . . . . . . 53.815–53.830 mm

Connecting Rod Bearing . . . . . . . . . . . . . . . . . . . .

Nominal . . . . . . . . . . . . . . . . . 53.977–54.016 mm
–0.25 . . . . . . . . . . . . . . . . . . . . 53.727–53.766 mm
–0.125 . . . . . . . . . . . . . . . . . . . 53.852–53.891 mm
Clearance Between Journal and Bearing:

0.022–0.076 mm (Wear Limit: 0.200 mm) . . . . . . .

Crankshaft End Play

End Play . . . . . . . . . . . . . . . . . . . . . 0.08–0.21 mm
Adjustment . . . . . . . . . . . . . . . . . Thrust Washers
Thrust Washers Available . . . . . . . . 2.31–2.36 mm
Thrust Washers Available . . . . . . . . 2.41–2.46 mm
Thrust Washers Available . . . . . . . . 2.51–2.56 mm

Main Bearing Carriers

Front . . . . . . . . . . . . . . . . . . . . 67.025–67.050 mm
Center . . . . . . . . . . . . . . . . . . . 66.670–66.690 mm
Rear . . . . . . . . . . . . . . . . . . . . 85.985–86.005 mm

Liners

Internal Diameter . . . . . . . . . . 92.000–92.010 mm
Protrusion . . . . . . . . . . . . . . . . . . . . 0.01–0.06 mm
Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . Shims
Available Shims: . . . . . . . . . . . . . . . . . . . 0.15 mm
Available Shims: . . . . . . . . . . . . . . . . . . . 0.17 mm
Available Shims: . . . . . . . . . . . . . . . . . . . 0.20 mm
Available Shims: . . . . . . . . . . . . . . . . . . . 0.23 mm
Available Shims: . . . . . . . . . . . . . . . . . . . 0.25 mm

Cylinder Head

Minimum Thickness . . . . . . . . . . 89.95–90.05 mm
Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel
Gasket thickness: . . . . . . . 1.42

6

0.1 mm 0 Holes

Gasket thickness: . . . . . . . 1.62

6

0.1 mm 1 Holes

DESCRIPTION . . . . . . . . . . . SPECIFICATIONS

Gasket thickness: . . . . . . . 1.52

6

0.1 mm 2 Holes

End Plates

Height . . . . . . . . . . . . . . . . . . . . . 89.02–90.00 mm

Connecting Rods

Weight (Without the crank

bearing) . . . . . . . . . . . . . . . . . . 1129–1195 grams

Small End Bearing Internal Diameter
Minimum . . . . . . . . . . . . . . . . . . . . . . . 30.035 mm
Maximum . . . . . . . . . . . . . . . . . . . . . . 30.050 mm
Crankshaft Bearings Standard Internal

Diameter . . . . . . . . . . . . . . . . . 53.997–54.016 mm

Pistons

Skirt Diameter . . . . . . . . . . . . 91.935–91.945 mm
(Measured at approximately 15 mm above the

bottom of the skirt)

Piston Clearance . . . . . . . . . . . . . 0.055–0.075 mm
Top of Piston to Cylinder Head . . . . 0.80–0.89 mm
Piston Protrusion . . . . . 0.53–0.62 mm Fit Gasket

(1.42), 0 Holes

Piston Protrusion . . . . . 0.73–0.82 mm Fit Gasket

(1.62), 1 Hole

Piston Protrusion . . . . . 0.63–0.72 mm Fit Gasket

(1.52), 2 Holes

Piston Pins

Type . . . . . . . . . . . . . . . . . . . . . . . . . Full Floating
Pin Diameter . . . . . . . . . . . . . . 29.990–29.996 mm
Clearance . . . . . . . . . . . . . . . . . . 0.004–0.014 mm

Piston Rings (Clearance in Groove)

Top . . . . . . . . . . . . . . . . . . . . . . . 0.080–0.130 mm
Second . . . . . . . . . . . . . . . . . . . . . 0.070–0.102 mm
Oil Control . . . . . . . . . . . . . . . . . 0.040–0.072 mm

Piston Rings (Fitted Gap)

Top . . . . . . . . . . . . . . . . . . . . . . . . . 0.25–0.50 mm
Second . . . . . . . . . . . . . . . . . . . . . . 0.20–0.35 mm
Oil Control . . . . . . . . . . . . . . . . . . . 0.25–0.58 mm

Camshaft

Journal Diameter Front . . . . . 53.460–53.480 mm
Bearing Clearance . . . . . . . . . . . . . 0.06–0.13 mm
Journal Diameter Center . . . . 53.460–53.480 mm
Bearing Clearance . . . . . . . . . . . . . 0.06–0.13 mm
Journal Diameter Rear . . . . . . 53.460–53.480 mm
Bearing Clearance . . . . . . . . . . . . . 0.06–0.13 mm

Tappets

Outside Diameter . . . . . . . . . . 22.195–22.212 mm

Rocker Gear

Shaft Diameter . . . . . . . . . . . . . 21.979–22.00 mm
Bushing internal diameter . . . 22.020–22.041 mm
Assembly Clearance . . . . . . . . . . 0.020–0.062 mm

Valves (Intake)

Opens . . . . . . . . . . . . . . . . . . . . . . . . 26° B.T.D.C.
Closes . . . . . . . . . . . . . . . . . . . . . . . . 58° A.B.D.C.

Valves (Exhaust)

Opens . . . . . . . . . . . . . . . . . . . . . . . . 64° B.B.D.C.
Closes . . . . . . . . . . . . . . . . . . . . . . . . 38° A.T.D.C.

NS/GS

ENGINE

9 - 79

SPECIFICATIONS (Continued)

Summary of Contents for 1998 Voyager



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 1998 Voyager

Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Hummer 2006 H2 Owner'S Manual preview
2006 H2
Brand: Hummer Pages: 502
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Honda 2010 Accord Coupe Owner'S Manual preview
2010 Accord Coupe
Brand: Honda Pages: 410
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5
PEUGEOT 5008 2017 Handbook preview
5008 2017
Brand: PEUGEOT Pages: 404
Velleman CAMSET28 User Manual preview
CAMSET28
Brand: Velleman Pages: 17
Honda 2005 Civic Owner'S Manual preview
2005 Civic
Brand: Honda Pages: 234
TEINHOF P-038 Fitting And Operation Manual preview
P-038
Brand: TEINHOF Pages: 2
Dakota Digital VFD3-52F Installation preview
VFD3-52F
Brand: Dakota Digital Pages: 2

Brands by name

Popular brands

Load more brands