Chrysler 2015 Town & Country Owner'S Manual Download

Page: 172 / 726

Roadside Assistance/Towing Assistance

If you need roadside assistance:

•

Push the Phone

button to begin.

•

After the “Ready” prompt and the following beep, say

“Towing Assistance.”

NOTE:

You should program the desired Towing Assis-

tance phone number using the Voice Command system.

To do this, push the Phone

button and say “Setup,”

followed by “Towing Assistance.” When prompted

say 1-800-521-2779 for U.S./Canada, say 55-14-3454

for Mexico City and 1-800-712-3040 for outside Mexico

City in Mexico.

Paging

To learn how to page, refer to “Working with Automated

Systems.” Paging works properly except for pagers of

certain companies, which time out a little too soon to

work properly with the Uconnect® Phone.

Voice Mail Calling

To learn how to access your voice mail, refer to “Working

with Automated Systems.”

Working With Automated Systems

This method is used in instances where one generally has

to push numbers on the mobile phone keypad while

navigating through an automated telephone system.
You can use your Uconnect® Phone to access a voice mail

system or an automated service, such as a paging service

or automated customer service line. Some services re-

quire immediate response selection. In some instances,

that may be too quick for use of the Uconnect® Phone.
When calling a number with your Uconnect® Phone that

normally requires you to enter in a touch-tone sequence

on your mobile phone keypad, you can push the Voice

Command

button and say the sequence you wish

to enter, followed by the word “Send.” For example, if

170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands