Chrysler 2015 Town & Country Owner'S Manual Download

Page: 400 / 726

•

Your vehicle may be equipped with either a standard

DVD player or a Blu-ray™ Disc Player. If equipped

with a Blu-ray™ Disc Player, the icon will be present

on the Player.

•

Turn on the Player (if equipped on Dual Screen Sys-

tem) by pushing the Power button, located on the far

left, or by pushing the button on the Remote Control.

•

When the Video Screen(s) are open and a DVD/Blu-

ray™ Disc is inserted into the VES™ player, the

screen(s) turn(s) on automatically, the headphone

transmitters turn on and playback begins.

•

For Dual Video Screen System, Channel 1 on the

Remote Control and Headphones refers to Screen 1

(second row) and Channel 2 on the Remote Control

and Headphones refers to Screen 2 (third row). Refer to

the Dual Video Screen section for more information.

•

The system can be controlled by the front seat occu-

pants using either the touchscreen radio, the DVD or

Blu-ray™ Disc Player, or by the rear seat occupants

using the remote control.

Blu-ray™ Disc Player

Play A Blu-ray™ Disc

To view a Blu-ray™ disc, insert the disc into the Blu-

ray™ VES™ disc Player. Playback will begin automati-

cally after the Blu-ray™ is recognized by the disc drive. If

playback does not begin automatically after the disc is

inserted into the Blu-ray™ Player push the play button. If

playback does not begin automatically after the disc is

inserted into Blu-ray™ VES™ disc Player follow these

steps:

398 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands