Chrysler 2015 Town & Country Owner'S Manual Download

Page: 535 / 726

Snow Tires

Some areas of the country require the use of snow tires

during the winter. Snow tires can be identified by a

“mountain/snowflake” symbol on the tire sidewall.

If you need snow tires, select tires

equivalent in size and type to the origi-

nal equipment tires. Use snow tires

only in sets of four; failure to do so

may adversely affect the safety and

handling of your vehicle.

Snow tires generally have lower speed ratings than what

was originally equipped with your vehicle and should

not be operated at sustained speeds over 75 mph

(120 km/h). For speeds above 75 mph (120 km/h) refer to

original equipment or an authorized tire dealer for

recommended safe operating speeds, loading and cold

tire inflation pressures.

While studded tires improve performance on ice, skid

and traction capability on wet or dry surfaces may be

poorer than that of non-studded tires. Some states pro-

hibit studded tires; therefore, local laws should be

checked before using these tire types.

Spare Tire Matching Original Equipped Tire And
Wheel — If Equipped

Your vehicle may be equipped with a spare tire and

wheel equivalent in look and function to the original

equipment tire and wheel found on the front or rear axle

of your vehicle. This spare tire may be used in the tire

rotation for your vehicle. If your vehicle has this option,

refer to an authorized tire dealer for the recommended

tire rotation pattern.

Compact Spare Tire — If Equipped

The compact spare is for temporary emergency use only.

You can identify if your vehicle is equipped with a

compact spare by looking at the spare tire description on

STARTING AND OPERATING 533

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands