34
Step 3:
To test the detector press the test button on the back. It will enter and remain
in testing mode (detect once every 10 seconds) for 3 minutes. Walk into the view of
the detector and look for a red light. The LED indicator will blink when movement is
detected.
Step 4:
Adjust the angle of your unit.
Note:
If pet-immune function is applied, please do not adjust the angle up or down, but keep it
parallel with the wall.
Restoring to Factory Settings
To restore your device back to factory settings, hold the pairing button (see page 5)
on the hub for 10 seconds. The hub will beep twice indicating it has been successfully
restored.
Note: Previously paired accessories will remain connected to your hub after a restore.
