Page 22
Accessory setup and use (continued)
Please refer to the product specification matrix at the back of this manual for accessory / model
availability.
Safety note: A qualified health care professional should be present when fitting the Chunc
wheelchair and accessories to an occupant.
i
To make adjustments to the accessory’s setup, you may need to loosen a number of
indicated bolts, perform the adjustment and then re-tighten the bolts. An Allen key set is
located on the wheelchair backrest to aid this.
Calf pads
•
:
Adjust height individually using bolt (H). For adjustment to lateral position and angle,
•
remove the cover and foam and use bolts (I).
Hip abductor
•
:
Adjust general position using bolts (J) and (L). Further adjustment of the pad is pos-
•
sible using bolts (K) and (L).
Removal: These may be removed with armrests in a procedure described in the “Every-
•
day use” section.
Tray
•
:
To adjust depth or remove, use orange knobs (M), slide tray and re-tighten knobs.
•
Accessory setup and use continued overleaf...
