background image

AFTER SHIPMENT FROM THE FACTORY THE BATTERY

NEEDS RECHARGING. IF NOT USED FOR A LONG PERIOD

OF TIME, THE BATTERY WILL START SELF-DISCHARGING,

WHICH MAY RESRLT IN A SHORT SERVICE LIFE OF THE

BATTERY OR MAY EVEN CAUSE DAMAGE TO IT DURING

WARRANTY PERIOD. CARE SHOULD ALSO BE TAKEN TO

AVOID EXCESSIVE TEMPERATURE AROUND THE UPS,

WHICH COULD ALSO RESULT IN REDUCING SERVICE

LIFE OF THE BATTERY. TO ACHIEVE MAXIMUM SERVICE

LIFE FROM THE BATTERY THE ABOVE INSTRUCTIONS

SHOULD BE FOLLOWED.

Line Interactive UPS with LED

Line Interactive UPS with LED

CONNECT EQUIPMENT TO UPS

PLACE LOCATION THE UPS

Inspect items inside box:

    Use r’s Manual & Warranty Card

  UPS & Packaging Material

  Mains Power Cord

  Program & Communication(Option)

Examine the packing carton for damage. Notify your dealer immediately if damage

is observed. Store the packing in a safe place for possible future trans-shipment of

the UPS.

Avoid Direct Sulight.

Avoid Excessive Heat.

Avoid Excessive Humidity

or Liquids.

Avoid Excessive Dust.

IP20 Indoor Use.

The UPS is intended for indoor use only. Although your UPS is very rugged, its internal

components are not sealed from the environment. Kindly note the following.

Place location the UPS on a sturdy, dry surface in a wellventilated area away from 

direct sources of heat. Leave at least 100mm clearance all around the UPS to provide 

adequate ventilation.

CONNECT UPS TO POWER LINE

Connect the Power Cord, to a verified grounded 3-wire receptacle. Do not power the UPS

using a surge suppressor or power strip. The utility power Turn ON.

IP20

UPS INDICATORS AND CONTROLS

Product contains voltages, which are potentially hazardous. 

Qualified service personnel should perform all repairs.

Do not try to open the cover and to service the system yourself, on user 

serviceable parts inside.

Refer servicing to qualified service personnel only and warranty Condition

Product has its own internal energy source (battery). 

Outlet receptacles may be Hot even when the product is not connected 

to an AC supply.

In case of fire risky, please change the Fuse with the same kind and same 

rate or Reset breaker.

Product is intended for indoor use only. 

Kindly note to avoid excessive heat, dust, humidity

CAUTION AND WARNING

i

Enable the UPS by turning on the Power ON/OFF switch, which is situated on the

front panel.

The UPS is now ready to use. Switch on your equipment and you are ready to function.

BATTERY MAINTENANCE / BATTERY CHARGING

                    ON / OFF SWITCH

                    Turn ON this button to supply power to the 

                     UPS outlets. To switch off power to the UPS 

                    outlets 

                    Turn OFF the switch. This switch is 

                   situated on the front panel of the UPS.

BACKUP INDICATOR

(Red LED continuous bright)

The buzzer beeps every 8 seconds. 

The battery is powering the UPS outlets. 

The expected runtime for a typical personal

computer (PC) is about 10 to 40 minutes.

LOW BATTERY INDICATION

(Red LED continuous bright)

The buzzer beeps fast whenever the 

battery is near the end of its runtime. 

Promptly save your data and exit all 

applications and shutdown the operating 

system.

OVERLOAD INDICATION

The Yellow LED flashes, with continuous

beeping. UPS protects itself at this time.

Please move some load.

                    AC NORMAL INDICATOR

                    (Green LED continuous)

                    The UPS is supplying conditioned 

                    utility power to its outlets.

UPS

BATTERY

OVERLOAD

PROTECTION

AUTOMATIC

VOLTAGE

REGULATION

AC SURGE

PROTECTION

Buck-2Boost

FEATURE

FEATURE

Connect the Power Cord, to a verified grounded 3-wire receptacle. Do not power

the UPS using a surge suppressor or power strip. The utility power Turn ON.

Do not connect a surge suppressor, power strip, or extension cord to the UPS outlet.

i

Pb

CAUTION :

BEFORE INSTALLATION & OPERATION

Chuphotic.User’s Manual English-06.PLUTO 800-1500VA.Rev1.00/2019

10

Smart µP Line Interactive

      UPS with Stabilizer

Risk of electrical shock.

Do not remove cover. 

No user serviceable part Inside.

Refer servicing to qualified person

Refer manual for environmental.

!

CAUTION

10

Smart µP Line Interactive

      UPS with Stabilizer

Risk of electrical shock.

Do not remove cover. 

No user serviceable part Inside.

Refer servicing to qualified person

Refer manual for environmental.

!

CAUTION

10

Smart µP Line Interactive

      UPS with Stabilizer

Risk of electrical shock.

Do not remove cover. 

No user serviceable part Inside.

Refer servicing to qualified person

Refer manual for environmental.

!

CAUTION

10

Smart µP Line Interactive

      UPS with Stabilizer

Risk of electrical shock.

Do not remove cover. 

No user serviceable part Inside.

Refer servicing to qualified person

Refer manual for environmental.

!

CAUTION

Reviews: