CICH International Group Inc I URL: http://www.globalsources.com/cich.co
1080P WiFi Display Dongle
EzCast M2
Function Description II ~
DLNA MODE:
Use steps:
Step 1
：
Enable WiFi on the mobile phone/laptop/tablet, search for the AP with the SSID named by dongle’s device name,
for example, LOLLIPOP-80833. Dongle is now working as a soft AP. So connect to the soft AP with the default password
12345678.
Step 2
：
Upon the connection between mobile/laptop/table and dongle is completed, open web browser on the mobile
phone/laptop/tablet and visit http:\\192.168.49.1.
Step 3
：
Touching the icon
will make the web browser jump to another page.
Step 4
：
Touch “Scan” and follow the instructions to connect to a WiFi AP which is able to access Internet through WAN.
Till now, dongle is able to access Internet through the AP. AP
’
s SSID and dongle IP address dispatched from AP
(
“
Device IP1
”
) will be shown on the screen. Because of dongle AP bridge function, the device
（
mobile phone/laptop/tablet
）
connected to dongle is able to access Internet too.
As show below:
In order not to affect the results, the distance between the device and the Dongle not more than 5m.
Switching mode:
As described above, Miracast and DLNA/Airplay are working on the different WiFi working models. There are two
methods to make switching:
A. By the key on PCB
：
The mode alternates between Miracast and DLNA/Airplay by pressing the key.
B. By web: Visit http:\\192.168.49.1 by web browser when the connection between the dongle and mobile
phone/laptop/tablet is established whatever under the Miracast mode or DLNA/Airplay mode. Touch the icon and the
switching will be undergoing. Please pay attention that the web browser will show something error when switching. The reason
is that the wifi driver should be loaded again when switching to a new mode. So the connection between devices and dongle is
disconnected.
www.globalsources.com/cich.co
