CI-600 Operation Manual Rev 5/15/2013
1554 NE 3
rd
Ave, Camas, WA 98607, USA
Phone (360) 833-8835 Fax (360) 833-1914
sales@cid-inc.com http://www.cid-inc.com
41
12.
How do I get my scans to line up in the tube?
a.
Make sure your scanner is rotated to the "HOME" position before inserting it in the
root tube. The scanner will rotate back to the home position after each scan (see the
.section in this manual). The CI-600 begins a scan by rotating the scanner body to
the “Home” position and then initiating the scan. This is referred to as the scanner
“returning to home.” If the instrument is already in the home position, it will not
need to rotate before starting to scan. Ensuring that the instrument is in the Home
position before scanning can eliminate scanning unintended areas and save time.
When calibrating the CI-600 in the white calibration tube, the Home position
location is of importance. Make sure to insert the scanner in the calibration tube
properly.
13.
What does it mean when I get an error with the error summary message in the .txt file: “The
requested operation requires elevation”?
a.
Any errors with "The requested operation requires elevation" message in them
means the user needs to turn off UAC. This is a work-around for a bug in the way the
ClickOnce technology handles the requirement for administrator privileges. To do
this:
1. Press Start and type UAC in the search bar.
2. Select "Change User Access Control Settings" and move the slider bar to the
bottom (Never Notify).
3. Re-start the computer.
14.
Where can I find the CI-600 driver?
a.
For newer instruments, with serial number 600-002-06xxx and more recent:
www.cid-inc.com/Software/CI-600/V3Driver.zip
For instrument built before 2006, please contact cid support (support@cid-inc.com)
with the serial number of the unit for instructions. If you have a Canon Driver
installed, you will need to remove it with using the CanoScan utility at
http://www.cid-inc.com/Software/CI-600/DelDrv.exe
. You should choose Run and
LiDE 20/30 when prompted.
15.
Does the CI-600 take 1200 DPI images?
a.
The CI-600 always scans at 1200 DPI because that is the native format of the image
sensor in the scanner. You will probably only see a marginal benefit from scanning
at 1200 DPI using the CID software. By default, that option is disabled since PCs with
limited memory cannot handle the task.
Summary of Contents for CI-600
Page 2: ......
