CI-600 Operation Manual Rev 5/15/2013
1554 NE 3
rd
Ave, Camas, WA 98607, USA
Phone (360) 833-8835 Fax (360) 833-1914
sales@cid-inc.com http://www.cid-inc.com
9
SOFTWARE/DRIVER INSTALLATION
The following steps should be carried out on each computer used with the CI-600 Root Scanner. If
the computer has been previously used with a CI-600 root scanner and has a CI-600 driver
installed, follow the directions to replace the previous version of the CI-600 driver with the current
version. The software can be downloaded at
http://www.cid-inc.com/root-image/ci-600-
The following prerequisites are required:
Windows Installer 4.5
Microsoft .NET Framework 4 Client Profile (x86 and x64)
Note:
Prior to switching to the ClickOnce (automatic update) technology the drivers were stored
under C:\Program Files\CID Bio-Science\CI-600 Root Scanner\Drivers. As of version 3.1.21 (with
ClickOnce) the drivers are stored under C:\Users\YourUserName\Documents\CI-600 Driver.
For instruments built after 2006, the new driver for the CI-600 can be downloaded at:
www.cid-inc.com/Software/CI-600/V3Driver.zip
For an instrument built before 2006, please contact cid support (support@cid-inc.com) with the
serial number of the unit for instructions. To determine what year your instrument was built, look
at the serial number sticker on the body of the CI-600. The serial number begins with 600-002-
xxxxx. The last 5 digits of the serial number indicate the year and individual instrument number.
For example, unit 600-002-06002 was the second unit manufactured in 2006, while unit 600-002-
09042 was the forty-second unit manufactured in 2009.
If you have a Canon Driver installed, you will need to remove it with using the CanoScan utility
(downloadable at
http://www.cid-inc.com/Software/CI-600/DelDrv.exe
). Choose “Run” and “LiDE
20/30” when prompted.
Summary of Contents for CI-600
Page 2: ......
