Contents
How to play
• Unit
• User Manual
• Press the heart key
to turn the touchpad ON.
• Listen to music and see the Disney Princess logo light
up when pressed.
• To repeat the last question, press on the repeat contact :
• Start to play by touching a contact and listen to the numbers, objects or names of the princesses
and their music.
• Select a game by pressing on one of the below contacts:
When touching the game mode 1 contact, you will be asked to find a princess, an object or a
number.
You have three attempts to find the correct answer.
After answering the question, the touchpad will give a new question. To go back into
discovery mode, you should press the Disney Princess logo contact.
When touching the game mode 2 contact, you will be asked questions relating to the
princesses.
You have three attempts to find the correct answer.
After answering the question, the touchpad will give a new question. To go back into
discovery mode, you should press the Disney Princess logo contact.
When touching the game mode 3 contact, you will be asked to give a sequence of three
numbers.
You have three attempts to give the correct answer.
After answering the question, the touchpad will give a new question. To go back into
discovery mode, you should press the Disney Princess logo contact.
When touching the game mode 4 contact, you will be asked questions to match either the
princesses to their belongings, or vice versa.
You have three attempts to give the correct answer.
After answering the question, the touchpad will give a new question. To go back into
discovery mode, you should press the Disney Princess logo contact.
Automatic shut off:
In order to save the batteries, the unit switches off after about 2 minutes of inactivity.
To re-activate the unit press the ON/OFF key contact.
•
Find
•
Quiz
•
Numbers
•
Matching
How to change batteries
1. This product requires 2 x AA batteries.
2. When required, using a suitable screwdriver, undo
and remove the battery cover located under the unit.
3. Insert 2 x AA batteries into the compartment
ensuring they are installed the correct way around.
4. The polarities are marked inside the battery
compartment.
5. Should the batteries have no polarity markings, the
flat end of the battery should always be inserted
against the spring.
6. Reassemble the battery cover and tighten the screw
to secure.
7. Do not over tighten.
Please note the important points below when using batteries to power this product:
•
Batteries should be inserted and removed by an adult.
• Only use the type of batteries specified in this user manual, or equivalent type. We recommend the use
of alkaline batteries.
• Follow the polarity diagram inside the battery compartment and the polarity markings on the batteries.
• An incorrect location may either damage the toy, or cause battery leakage, or, to an extreme degree,
lead to battery explosion.
• Do not try to charge non-rechargeable batteries, as they may leak or explode.
• Replace all batteries at the same time.
• Do not mix new with old batteries
• Do not mix different types of batteries (i. e. alkaline and zinc carbon).
• Remove the batteries during long periods of non-use. Always remove exhausted batteries from the
product. Battery leakage and corrosion can damage the product.
• Do not short-circuit the supply terminals. Store batteries away from metal objects.
• Do not dispose of batteries in fire, as they may leak or explode. Never disassemble batteries.
• Rechargeable batteries should not be used.
• When rechargeable batteries are used anyway :
o Rechargeable batteries shall be charged only under the supervision of an adult.
o Rechargeable batteries shall be removed from the toy before being charged (if they can be
removed).
• If a battery is swallowed, consult a Doctor or Medical Facility. Don’t forget to take the product with you.
• If battery leakage occurs and comes in contact with the skin or eyes, wash immediately with lots of water.
• Batteries are included for demonstration purposes only and may need replacing after purchase.
• Strong Electro Magnetic Interference may disturb the normal function of the product. If so, simply reset
the product to resume normal operation by following the instruction manual. In case the function does
not resume, please use the product in another location.
