-
11
-
Metal Dog Tag 500 / Metal Dog Tag 500 Plus
Manuale Operatore
rev 04-2008
Operator Manual
Fig. 1
2.
DISINBALLO
La macchina considerate dimensioni e peso viene
fornita con una cassa di legno per evitare qualsiasi
danneggiamento durante il trasporto.
Le movimentazioni devono essere eseguite da un
muletto a 2 forche o comunque sempre da 2 persone
poichè il peso lordo della cassa è di 77 Kg.
ATTENZIONE LA MACCHINA HA UN
PESO DI 77 KG, E LE SUE MISURE
SONO: 830X730X600 MM.
QUINDI OGNI SPOSTAMENTO DEVE
ESSERE ESEGUITO DA 2 PERSONE.
Per disimballare la macchina procedere come segue:
•
Sollevare la cassa utilizzando un carrello elevatore
•
Rimuovere le quattro viti laterali (1) con chiave
CH 10mm, quindi sollevare il coperchio.
•
Utilizzando una chiave CH 17, rimuovere i due
perni di ancoraggio macchina posizionati nel piano
inferiore del pallet.
•
Dopo aver rimosso i perni la macchina può essere
sollevata per posizionarla sul tavolo di lavoro, lo
spostamento deve essere effettuato da 2 persone.
•
Aprire la busta dove si trovano i manuali e la
chiave per aprire il portello frontale.
•
Vedere poi il paragrafo successivo per la verifica
degli accessori in dotazione.
•
Conservare il materiale dell’imballo per eventuali
usi futuri oppure smaltirlo negli appositi contenitori
per la raccolta differenziata.
2.
UNPACKING
The machine is delivered in a wooden packing case.
This is due to its dimensions and weight and avoids
the risk of dammage to the machine.
All displacement should be done by a forklift or
therefore always by two persons because the gros
weight is about 77 Kg.
WARNING ! THE MACHINE WEIGHS 77
KG. AND THE DIMENSIONS ARE:
830X730X600 MM. ALL
DISPLACEMENTS MUST BE DONE
WITH 2 PERSONS.
To unpack the machine please follow the instructions
below:
•
Lift the case using a fork lift truck
•
Remove the four side screws (1) with a CH 10 mm
wrench, and remove the cover .
• Using a CH 17 wrench, remove the two machine
anchoring pins located in the lower part of the
pallet.
•
Having removed the pins the machine can be
lifted up and placed on the work table. This
operation should be done with two persons.
•
Open the envelope which contains the manuals
and the key for the front cover
•
Please refer to the next paragraph in order to
check all the accessories.
•
Keep the packaging material for possible future
use or dispose of it using the containers provided
for differentiated refuse collection.