-
16
-
Metal Dog Tag 500 / Metal Dog Tag 500 Plus
Manuale Operatore
rev 04-2008
Operator Manual
TASTIERA
KEYBOARD
Fig. 6
Fig. 7
E-00 PWR-ON STAND-BY STATUS - PRESS START
Il pannello frontale è realizzato da:
•
Display a
LCD
di 2 righe per 40 caratteri che verrà
utilizzato per segnalare gli stati operativi della
macchina.
•
Tasto
PAUSE-START
•
Tasto
FEED
•
LED
di colore
rosso
(in alto) per indicare lo stato
di errore.
•
LED
di colore
verde
(in basso) per indicare che la
macchina è accesa.
La tastiera a scomparsa è composta da:
•
10
tasti numerici da
0
a
9.
•
6
tasti funzione per abilitare le funzioni di diagnosi
della macchina.
•
4
tasti di movimento (
) per muovere
il cursore nella direzione voluta.
•
1
tasto di
ENTER
utilizzato per confermare i
comandi.
Nello stato di "
PROCEDURA DI SET UP
"
Il tasto
1
inserisce il valore
+
Il tasto
2
inserisce il valore
-
3.6 ACCENSIONE E VERIFICA
Una volta installata, la macchina può essere accesa
mediante l’interuttore generale e sul display dovrà
apparire il messagio di fig.7.
Premere il pulsante di
START
sul pannello frontale a
fianco del display per eseguire il reset generale. A
fine ciclo sul display appare il messaggi di fig.8 per
indicare lo stato attivo della macchina.
The following list describes the structure of the front
control panel:
•
An
LCD
display ( 2 rows with 40 characters per
row ) which is used to indicate the operating states
of the machine.
•
A
PAUSE-START
key.
•
A
FEED
key
•
A
red
coloured
LED
(top) to signal any error
•
A
green
coloured
LED
(bottom) to signal that the
machine is switched on.
The following list describes the structure of the
Keyboard
•
10
numeric keys. (
0 - 9
)
•
6
Function keys which enable the diagnostic
functions of the machine
•
4
direction keys (
) for moving the
cursor in the desired direction
•
1 ENTER
key which is used to confirm the
commands.
Into the "SET UP MENU"
The
1
push button means
+
sing
The
2
push button means
-
sing
3.6
SWITCHING ON AND CONTROLLING
THE DISPLAY
Once installed the machine can be switched on with
main switch, on display will appear the message as
fig.7.
Press the
START
key on left side of the front panel
beside the display. This activates a general reset
which, when completed, will leave another message
(Ref. Fig 8) on the display to indicate the Ready state
of the machine.