-
65
-
Metal Dog Tag 500 / Metal Dog Tag 500 Plus
Manuale Operatore
rev 04-2008
Operator Manual
NAME: DOCTOR TYPE: ( V-M-P-C-F ) VARIABLE
Passo-5
Immissione del massimo numero di
caratteri per campo
No. OF CHAR : 31
Il programmatore può limitare il numero dei caratteri
accettati dalla punzonatrice. Il massimo limite è
determinato dal valore visualizzato nella seconda
linea del LCD.
Scrivere il valore desiderato poi
ENTER
.
Passo -6
Scrivere il Font
Sulle macchine serie Metal possono selezionare due
tipi di font. La selezione del tipo di font viene
determinata dalla configurazione del tamburo.
CODICE
TIPO DI FONT
0
Carattere Standard
1
Carattere OCR
Immettere il tipo di font poi
ENTER
.
A questo ppunto sono possibili due linee di
programmazione
A
Designazione del prossimo campo.
B
Memorizzazione del formato se questo era
l'ultimo campo.
Opzioni sui campi
V=Dati Variabili , M=Campi con Mod Check P=Dati
Protetti , C=Contatore Sequenziale , F=Campo
duplicato
LCD-16 visualizzerà se:
A
Uno o più campi opzioni di campo.
B
La destinazione che è terminata per questo
campo.
Step-5:
Enter Maximum Field Length
No. OF CHAR : 31
The programmer can limit the number of characters
that will be accepted by the embosser. The maximum
limit is determined by the value displayed at the end
of the second line of the LCD.
Type in the desired value and press
ENTER
.
Step-6:
Font Type
There are two selectable types of font. The selection
of the type of font is determined by the embossing
wheel configuration. The selections possible for any
embosser are given during the initial installation.
CODE
FONT TYPE
0
Normal (Standard Characters )
1
OCR Characters
Enter font type and press
ENTER
.
The following options are now available.
A
Branch to the programming of the next field
if this was not the last field to be programmed
and none of the field options in LCD-14 were
selected.
B
Branch to options for fields if one or more of
the fields options in LCD-14
were selected.
Options for Fields
V = Variable Data, M = Mod Check Field, P =
Protected Data, C = Sequential Counter Field, F =
Field Duplicated.
LCD-16 will be displayed if:
A
One or more of the Field Options were
selected.
B
The design data for this field has been
completed.