28
BLITZ
5-1996
7
ACCESSORIES
7
7.1 - FILLING PIPING
This piping is complete with a coupling union and a filter with foot valve for suction and is used to tank.
It must be screwed onto the suction union of the P4 pump instead of the tap with chain.
The assembling should ALWAYS be carried out when the “P3” tap lever is in “C” position.
Before use, check the seal and see wether the foot valve is working correctly by pouring some water
into the piping.
7.3 - ADDITIONAL AGITATION PUMP
All indications and instructions can be found in the use
and maintenance manual supplied with this optional
accessory.
7.4 - MECHANICAL BLADE
AGITATOR
All indications and instructions can be found in the use
and maintenance manual supplied with this optional
accessory.
7.2 - ROTATING GROUP WITH ELECTRIC CONTROL
It is an accessory used to modify the spraying direction. It may be used with only a few types of distribution devices.
All indications and instructions can be found in the use and maintenance manual of the distribution
devices with which this group may be used.
UM55022
ADDITIONAL AGITATION
PUMP
UM55012
P4
UM55017a
c
3-WAY TAP