20
OXE DIESEL SINGLE CONTROL HEAD MANUAL
MAINTENANCE
!
WARNING
Following the routine maintenance scheduled outlined below will ensure
years of service from your OXE Diesel Control Head. As well as keep you and
your passengers safe from the dangers that are present on and off the water.
USER’S RESPONSIBILITY
Prior to every use
Refer to section
OPERATION, Before each use.
1.
Inspect all electrical cables for wear, kinks, or damage.
2.
Check for binding, loose, or worn or shift/throttle control components.
3.
Verify proper shift and throttle response at all control levers.
4.
Verify that no faults or warnings are shown on the Oxe Diesel Control Head.
!
WARNING
Do not operate boat if any component is not in proper working condition.
QUALIFIED OXE DIESEL MECHANIC
After the first 20 hours, then every 100 hours or 6 months thereafter, whichever
comes first.
1.
All points noted above.
2.
Check tightness of
all
fasteners/fittings throughout the boat control system.
Tighten to correct torque specifications as required.
3.
Check for mechanical play or slop throughout boat control system, correct as
required.
4.
Check for signs of corrosion. If corrosion is present contact your retailer or
Cimco Marine AB.
5.
Check all electrical harnesses for chafing and wear.
MAINTENANCE
