11
Melter Feature Overview
NOTE
: This general outline will only familiarize you with the machine. Read through the
entire manual before putting this machine into operation.
1)
Propane Tank Mount:
Propane Tank mount for heated tool box, handheld torch, and
heated trough.
2)
Heated Tool Cabinet:
Cabinet for mastic application tools that is heated with a propane
burner.
3)
Oil Level Dipstick And Temperature Gauge:
Allows you to monitor the amount of Heat
Transfer Oil in the tank. Displays the heat transfer oil temperature.
4)
Mastic Trough:
Mastic is dispensed from the chute, chute angle can be adjusted. The
Trough is heated with a propane burner.
5)
Mastic Gate:
Controls the mastic to flow or stop.
6)
Loading Door:
Place the material on safety door to load the melting tank.
7)
Control Panel:
The main control panel is used to monitor the temperature of the
material, heat transfer oil, and battery voltage of machine use.
8)
Hydraulics Control:
Hydraulic and Agitation Control.
Base model shown
Your model may included additional options or variations.
Summary of Contents for ME3
