19
Modifying Sealant Temperature Control Settings
The Sealant Temperature Control on your CIMLINE ME3 Melter has been factory set to run the
most common types of mastics. These mastics have an application temperature of 380° F (193°
C) With some mastics, it may be require a change to the controller to achieve the appropriate
application temperature. To achieve this, open the control box and alter the Material
Temperature Controller (top controller) by following the directions below.
Decrease
Increase
(A)
1) Press the SET button.
2) SP1 is displayed.
3) Press the SET button.
4) Current Temperature is displayed.
5) Use the arrow buttons to change to the desired temperature.
6) Press the SET button.
7) Let the controller time out. Your controller will now be changed and the updates will be
saved.
Material Tank Capacity
MATERIAL CAPACITY
(Tank cutaway)
MATERIAL VAT
AIR
OIL
The amount of material can be calculated by measure the depth of material in the tank.
INSULATION
Material
Depth (in)
Material In
Tank (Gal)
2
9.0
4
25.9
6
44.8
8
116.1
10
131.4
12
145.8
14
156.8
16
173.3
18
202.3
20
230.4
22
258.6
24
286.8
26
315.0
28
343.2
Summary of Contents for ME3
