background image

 

TABLE OF CONTENTS: 

Serial Number, Model Number, Engine Number .....................................................  3 

Contacting Cimline ....................................................................................................  3 

Personal Safety, Signal Words in Manual ................................................................  4 

Trailer Safety ..............................................................................................................  5 

Wheel Specifications .................................................................................................  6-7 

Weights and Dimensions ..........................................................................................  8-9 

Replacement Labels ..................................................................................................  10 

ME3 Feature Overview ...............................................................................................  11 

ME3 Controls and Their Functions ...........................................................................  12-15 

ME3 Start Up Procedure ............................................................................................  16-17 

ME3 Cool Down/Shut Down Procedure ....................................................................  18 

ME3 Automatic Temperature Control Setting ..........................................................  19 

ME3 Sealant Material Tank Capacity ........................................................................  19 

ME3 Fluid and Components Specs ..........................................................................  20 

ME3 Heat Transfer Oil Specs ....................................................................................  21 
 

MAINTENANCE AND TROUBLESHOOTING: 

ME3 Maintenance Schedule ......................................................................................  23 

ME3 Maintenance - Key Components ......................................................................  24 

ME3 Maintenance - Changing Heat Transfer Oil ......................................................  25 

ME3 Maintenance - Heat Transfer Oil Servicing ......................................................  26-27 

ME3 Maintenance - Tank Burner ...............................................................................  28-31 

ME3 Maintenance - Trouble Shooting Guide ...........................................................  32 
 

PARTS AND ASSEMBLY DRAWINGS: 

ME3 Trailer Wiring Diagram and Parts .....................................................................  34 

ME3 Main Wiring Harness .........................................................................................  35 

ME3 Control Panel Wiring Diagram and Parts .........................................................  36-38 

ME3 Tank Burner Internal Wiring Diagram ..............................................................  39 

ME3 Tank Burner Parts ..............................................................................................  40 

ME3 Agitation System Diagram and Parts ...............................................................  41 

ME3 Hydraulic Manifold Parts and Schematic.........................................................  42-43 

ME3 Hydraulic Schematic and LP Component Breakdown ...................................  44-45 

ME3 Diesel Engine Components ..............................................................................  46-47 

ME3 Miscellaneous Components and Parts ............................................................  48-49 

ME3 Mastic Tools .......................................................................................................  50 

Shipping Papers and Information 

 

In addition to this operators manual, a packet containing IMPORTANT INFORMATION has been 

enclosed with your Melter.   

The follow 

Manufacturer's Documents

 are included for the follow parts: 

 

a) 

Engine 

 

b)  

Material Pump 

 

c) 

Burner  

Summary of Contents for ME3





















































Reviews: