12 |
P a g e
MAINTENANCE REMINDERS
When maintenance is required, the LCD display screen will brighten, flash and the maintenance
reminder will appear.
Replacing the CIMR® cell/s
The CIMR® cell is no longer working correctly:
•
Replace the CIMR® cell.
•
Replacement cells are available from your CIMR® distributor.
•
The CIMR® cell/s should be replaced when REPLACE CELL appears on the display, or
twelve (12) months when used continuously or two (2) years if used less than 12 hours a
day, whichever comes first, even if the CIMR® unit does not display this message.
Cleaning the CIMR® cell/s
Perform cleaning (approximately every 30 days or as and when CIMR® unit indicates
required action to be taken):
•
Clean the filter assembly
•
Vacuum the CIMR® cells
•
Vacuum top and rear grill openings
To change the CIMR® cells see instructions and illustrations on page 13 of the manual.
NOTE
Be sure to press the reminder reset button to clear the reminder following regular
maintenance.
Resetting the reminders
•
The reminder you need to reset is the PERFORM CLEANING and PERFORM RCI CELL reminder.
•
After performing maintenance, press the reset button and the LCD screen will stop flashing
to let you know the reminder has been cleared.
•
All the other service reminders will clear automatically once the CIMR® unit has been turned
off and back on and the problem has been corrected.
Summary of Contents for 2000
Page 1: ......
