ENGLISH
11
2.5.4 INSTALLING THE ORIGINAL CINDERELLA FLUE TERMINAL CAP
NOTE!
The Cinderella Original installation Kit includes a flue terminal cap that is designed for
optimal flow and increased product efficiency. This cap consists of two parts, where the
base section can be fixed to the pipes with stainless screws or glue, this for easy connection
and removal for maintenance of the ventilation pipes. Use the socket-less part of the cut
pipe from when installing the horizontal flue pipe in the Cinderella installation kit as the last
section of the ventilation pipe, this will be utilized as the connection to the flue terminal cap.
WARNING!
• This toilet may only be connected to the gas supply by a specialist in accordance with
the technical and administrative regulations of the country in which the toilet is in-
stalled.
• Only operate the toilet at the pressure shown on the type plate on the back of the toilet.
• Only operate the toilet with the type of gas shown on the type plate on the back of the
toilet.
• Use a metal-sealed screw connection when connecting the gas
•
Use flexible gas piping to ensure that the installation remains in a tensionless state (not
included in the scope of the delivery).
•
Have a leak test and a flame test performed by an authorized specialist after profes
-
sional installation.
•
Ensure you are issued with a certificate of inspection.
IMPERIAL
METRIC
NOTE
Fuel consumption
0.449 (lb/hour)
0.204 (kg/hour)
Inlet gas pressure
8-20 Inches WC
20-50 mBar
Toilet gas connection
¼’’ NPT Female
Fitting - Straight coupling
¼’’ NPT LH - G ¼’’ LH
Mounted on toilet
Brass fitting, 90 degree
G ¼’’ LH Nut -
½
’’ NPT female
Mounted on toilet
2.5.5 GAS INSTALLATION
M
in
10
m
m
2 x
Min 10mm
25/64”
Summary of Contents for FREEDOM GAS NA
Page 62: ...32...
Page 63: ...FRAN AIS 33...
