22
CAUTION!
Do not use any sharp tools or objects when cleaning the ash container insert, as this will
damage the insert and reduce its service life.
NOTE!
• In order to preserve the functionality of your toilet in the best possible way, we
recommend that you carry out the “steam cleaning” procedure in accordance with
section 4.2.2 every time you empty and wash the insert. This will prevent the possible
accumulation of tar and unwanted deposits in the catalytic converter and toilet exhaust
system.
• When emptying the toilet, make sure that the grid power is connected. Emptying the
appliance without power will not enable the system to reset the use counter.
4.2.2 STEAM-CLEANING THE CATALYTIC CONVERTER
Recommended frequency: When emptying the ash container or at least every 500 uses. To perform steam
cleaning:
1. Ensure that the toilet is cold and the ash container has been emptied and cleaned (see section 4.2.1).
2. Remove the front cover and release the ash container
3.
Pour approximately 1 L of clean water into the toilet insert
4.2 CUSTOMER MAINTENANCE
4.2.1 EMPTYING AND CLEANING THE ASH CONTAINER
15 minutes
1
2
3
4
5
6
7
8
15 minutes
HOT WATER
HOT WATER
NOTE!
Make sure to dry the external
part of the insert before
reinserting it into the ash
container
Summary of Contents for FREEDOM GAS NA
Page 62: ...32...
Page 63: ...FRAN AIS 33...
