11
There are three ways to output the stored barcode data and quantity
information. The preset output format is to transmit the stored barcode data
as many times as the quantity indicated. But you can also set the scanner to
outpt the stored barcode data together with quantity information in two fields,
and a prest delimter
“,“
will be output in between. To fulfill different
application requirements, both the delimiter and output sequence can be
changed as well.
As many times as the quantity indicates
◆
<Quantity><Field Delimiter><Scanned Data>
<Scanned Data><Field Delimiter><Quantity>
How to Transmit Stored Data
The scanner is preset to transmit all stored data by scanning the “Transmit
Stored Data” command. During the transmission, the scanner will emit
continuous short clicks and the link indicator will blink blue. Then the scanner
will give two short beeps after data transmission is completed.
Transmit Stored Data
But you are able to set the scanner to transmit the stored data by placing the
scanner onto the cradle as well.
Scan Barcode
Command
◆
Place Scanner
onto the Cradle
Scan command or Place
Scanner onto the Cradle
How to Delete the Last Scanned Data
If you scanned a wrong barcode, the “Delete Last Scanned Data’’ command
is helpful to recover mistake. By scanning the ‘’Delete Last Scanned Data’’
command, the last stored data will be deleted.
Delete Last Scanned Data
